Mopar Muscle Association UK

Posted: **Wed Mar 16, 16 2:23 pm**

hello

as it says

the shocks at the rear bolt up with dish shaped washers either side of the rubber bushes

should they cup the end of the rubber or should they pin the middle near the bolt in tight letting the rubber bulge towards the edges

neither way looks particularly good

i.e conCAVE in towards the rubber, convex to the nut or concave out towards the metalwork or nut.

(0) or )0(

currently (0) cos that's how it was with the old shocks

Dave

Posted: **Wed Mar 16, 16 2:36 pm**

(0). The only washers I've come across on a Mopar that go the other way round are on the strut rod bushes in the K frame.

Posted: **Wed Mar 16, 16 3:50 pm**

(0) as on all I have worked on

Posted: **Wed Mar 16, 16 3:59 pm**

Yes (O) as above. Only K frame strut rods go )O(.

Posted: **Wed Mar 16, 16 4:12 pm**

wicked

they are on the right way then

many thanks

Dave

Posted: **Wed Mar 16, 16 6:38 pm**

Dave999 wrote:wicked

they are on the right way then

many thanks

Dave

It's not like you to be conventional and go with the Flow, Dave

Posted: **Thu Mar 17, 16 10:34 am**

yeah but there is nothing worse than your bushes being gripped the wrong way.

Dave

Mopar Muscle Association UK

which way round for dished washers on shock mount rear

which way round for dished washers on shock mount rear