Hemi Engine Build Up!

Moderator: Moderators

User avatar
Trigger_Andy
Posts: 7867
Joined: Sun Apr 18, 04 10:27 pm
Location: Stavanger, Norway

Post by Trigger_Andy »

That looks well 8-) Kev, I would be tempted to leave it clear or do what Dave says and paint half of it :thumbright:
DaveBishop
Posts: 1667
Joined: Sun Apr 18, 04 11:22 pm
Location: Alicante Spain

Post by DaveBishop »

I am going to paint half of mine
2 x 1969 Dodge Darts
Anonymous

Post by Anonymous »

If those squares are one inch, it must be fiddly to put together. :?
User avatar
Ivor
Site Admin
Posts: 13000
Joined: Sun Apr 18, 04 11:11 pm
Location: The village of Evenley

Post by Ivor »

I reckon it's gonna leak when you put the oil and water in Kev :wacko:
The pump don’t work coz the vandals took the handles.

www.ivorsroadrunner.com
User avatar
Kev
Posts: 13955
Joined: Sun Apr 18, 04 11:04 pm
Location: Brisbane, Oz.

Post by Kev »

Wondering whether to just build it in clear and leave off all the ancillaries! Looks lovely
I'm leaving all the clear clear, as it were. It's just when all the ancillaries are on you can't see much! :D
<center>
The name is Kev, nowadays known as Kevvy or Pommie C***!</center>
Anonymous

Post by Anonymous »

This is awesome Kev, I think I'm gonna have to get one :)
User avatar
Kev
Posts: 13955
Joined: Sun Apr 18, 04 11:04 pm
Location: Brisbane, Oz.

Post by Kev »

Dude! That there "drain" is the speaker for the Authentic Hemi SoundChip 8-) 8-) 8-)
<center>
The name is Kev, nowadays known as Kevvy or Pommie C***!</center>
User avatar
Kev
Posts: 13955
Joined: Sun Apr 18, 04 11:04 pm
Location: Brisbane, Oz.

Post by Kev »

You do know it's powered by an electric motor! :thumbright:
<center>
The name is Kev, nowadays known as Kevvy or Pommie C***!</center>
User avatar
Kev
Posts: 13955
Joined: Sun Apr 18, 04 11:04 pm
Location: Brisbane, Oz.

Post by Kev »

Some scale shots and stuff
<center>
The name is Kev, nowadays known as Kevvy or Pommie C***!</center>
User avatar
Kev
Posts: 13955
Joined: Sun Apr 18, 04 11:04 pm
Location: Brisbane, Oz.

Post by Kev »

Special stage! All ready to glue the heads on for good! 8-)
<center>
The name is Kev, nowadays known as Kevvy or Pommie C***!</center>
User avatar
mopar_mark
Posts: 6738
Joined: Fri Jul 14, 06 8:01 pm
Location: Windlesham, Surrey

Post by mopar_mark »

Adam68 wrote:I want one Kev, gotta get some practice in.

Where do you get them?
http://cgi.ebay.com/DODGE-426-HEMI-1-4- ... dZViewItem

Adam, seen them on E bay USA, but sure they must be available some where in UK
User avatar
Kev
Posts: 13955
Joined: Sun Apr 18, 04 11:04 pm
Location: Brisbane, Oz.

Post by Kev »

That's the Street Hemi kit. I got mine over here from modelsforsale.com. They have a Street Hemi in stock for £54 incl P&P plus one with a damaged box a little cheaper. http://www.modelsforsale.com/catalog/pr ... _id=129645
Found a Race Only Hemi same as mine here;
http://www.netmerchants.co.uk/product.p ... 073f4a9db8
I'd phone them up though, as I haven't heard of them.
<center>
The name is Kev, nowadays known as Kevvy or Pommie C***!</center>
Anonymous

Post by Anonymous »

How come it is the last day of the month and you still have £2 left over to use for scale demonstration ?

Are there any jobs at BT ?
User avatar
Kev
Posts: 13955
Joined: Sun Apr 18, 04 11:04 pm
Location: Brisbane, Oz.

Post by Kev »

Sandy wrote:How come it is the last day of the month and you still have £2 left over to use for scale demonstration ?
Borrowed them out of George's money box ;)
<center>
The name is Kev, nowadays known as Kevvy or Pommie C***!</center>
Post Reply