barrel

Anonymous · Post by **Anonymous** » Sat Mar 31, 07 9:44 pm

hello any one know how to remove barrel ,thanks

Dave-R · Post by **Dave-R** » Sat Mar 31, 07 9:58 pm

There is normally a hole to insert a pin which releases it.

It looks like someone has been having a right go at yours.

Rich · Post by **Rich** » Sat Mar 31, 07 10:00 pm

Did my 70 last year but am struggling to remember.I do know that its very easy,you just have to poke a small screwdriver/pointer down a hole some where which releases the barrel from the housing.
I know this aint no tech reply but knowing this may help you till I remember,or some one with more grey matter comes along

latil · Post by **latil** » Sat Mar 31, 07 10:01 pm

Take off the lock lever guide plate(the black triangular bit) underneath that you'll find a small hole. Put key in lock,turn to lock position and remove key. Insert a small rod or screwdriver in to the release hole and push to release lock. At the same time pull the lock barrel out.

Rich · Post by **Rich** » Sat Mar 31, 07 10:07 pm

god this place is good....even if all the replies came from 70 owners..

some more tech than others

Anonymous · Post by **Anonymous** » Sat Mar 31, 07 10:08 pm

thanks all --that pic s done the job

Rich · Post by **Rich** » Sat Mar 31, 07 10:09 pm

good here innit?

Anonymous · Post by **Anonymous** » Sat Mar 31, 07 10:30 pm

its like you were all sitting ,waiting ,for the next post to arr

ive

latil · Post by **latil** » Sat Mar 31, 07 10:37 pm

Next.

Rich · Post by **Rich** » Sat Mar 31, 07 11:41 pm

Glad I`m not the only one who needs a life

Anonymous · Post by **Anonymous** » Sun Apr 01, 07 2:14 pm