Prop Length

Jules · Post by **Jules** » Thu Dec 18, 08 10:36 pm

Can anyone tell me the length of a prop on a 68 Charger?
I need to get mine done, but need to know at what length

TIA

ANTON · Post by **ANTON** » Sun Dec 21, 08 10:16 pm

Hi jules
I'm taking mine out tomorrow when all my suspension is coming out. If you let me know where to measure i'll measure mine for you.I have a 904 trans and 8 3/4 diff.

Mick70RR · Post by **Mick70RR** » Sun Dec 21, 08 10:34 pm

If the gearbox and axle are in the car, push the gearbox yoke all the way in and measure between the centre of the UJ's. Subtract 3/4" and that's the length.

Jules · Post by **Jules** » Mon Dec 22, 08 3:31 pm

Cheers mick. I'll have to do it that way then.
Got a 727 in mine, so think the shaft is a tad longer.
Thanks for the info guys

Dave-R · Post by **Dave-R** » Mon Dec 22, 08 3:39 pm

Jules wrote:Cheers mick. I'll have to do it that way then.
Got a 727 in mine, so think the shaft is a tad longer.
Thanks for the info guys

The shaft will be shorter because a 727 is longer than a 904.

Jules · Post by **Jules** » Mon Dec 22, 08 5:49 pm

Sorry Dave, I meant the tail shaft of the 727 is longer than the 904

My Bad.