Methanol and nitrous base lines????

Anonymous · Post by **Anonymous** » Tue May 19, 09 7:55 pm

any one ever used nitrous with meth (carb'd), have jetted it to the nos book (obviously for petrol engines) and it runs slower.

using c12 with the nos.

is a 250 plate systme.

any idea's???

Post by **TyreFryer** » Tue May 19, 09 11:01 pm

Pete, I know nothing about using Methanol with Nitrous, but I have a vintage racing bike that runs on Methanol, the jetting on that needs to be a LOT bigger than for running on petrol, you literally have to drill out the main jet.

Anonymous · Post by **Anonymous** » Tue May 19, 09 11:15 pm

Does it run clean , no misfires?

What plate set up you running? , what motor? , jet spread? bottle pressure? fuel pressure? spark lead? plugs heat range?....................................................pistons? rings?

As Martin says , need to increase jets to run methanol.

Don't be shy Pete , tell us all about it.

db · Post by db » Wed May 20, 09 12:19 pm

Never mind that... tell us about the bike Martin!! Pics!!

Post by **TyreFryer** » Wed May 20, 09 2:26 pm

http://www.moparuk.com/forums/viewtopic ... t=brighton but don't let's hijack Pete's thread.

Anonymous · Post by **Anonymous** » Wed May 20, 09 5:47 pm

ill get all the info you need adam.

we were useing a different plug when on the nos, same jets in the carb.

its running fine on the motor with the meth, bu son as you use the nos it splutters and miss's.

will get everything you need to know adam lol.

loving the rudge btw all bike hijacks welcome

Anonymous · Post by **Anonymous** » Sat May 23, 09 9:12 pm

Long time no hear Pete , you blown the motor up?