Pitman Arm torque setting?

RobTwin · Post by **RobTwin** » Sun Mar 20, 11 12:55 am

As the title suggests, does anyone have info on what to tighten the Pitman Arm nut to?

It could be 130 lb/ft but it's not clear in the manual

Also, what size socket is needed? Looks to be 33mm or 1-5/16" ?

Thanks

Anonymous · Post by **Anonymous** » Sat Mar 26, 11 1:35 pm

Sounds about right Twins!
A two foot long breaker bar will give you about that sort of torque if you don't have a Talk-wrench.

baccy

Guy · Post by **Guy** » Sat Mar 26, 11 2:11 pm

baccaruda wrote:A two foot long breaker bar will give you about that sort of torque if you don't have a Talk-wrench.

baccy

Well that depends on who is pullin on the bar

RobTwin · Post by **RobTwin** » Sun Mar 27, 11 2:20 am

Thanks chaps. A bit more digging on t'net and it looks like it should be 175 lb/ft

So that's prob a 3' breaker bar