play in steering still after restoration 67 gtx ?
Moderator: Moderators
-
Anonymous
http://www.hemi6pack.com/knowledgebase/ ... eering.pdf
http://www.hemi6pack.com/knowledgebase/vhmanual/19 Steering.pdf
applicable to all chrylser boxes
just the case is different from RHD to LHD
and the bearings
aussie ones used needle bearings due to earlier design not changing in 1971
but even in this aussie manual they have used some of the US pictures
it is
Well handy
pointless having a go at dave and clive they both mean well...both lovely chaps once you get past the initial fight or flight urge
if you tickle dave under the chin he makes a strange purring sound and is a very good mime artist
tickle clivey and you get a free bus pass and 25% discount at the london transport museum
and he can juggle chainsaws
marvelouse
Dave
http://www.hemi6pack.com/knowledgebase/vhmanual/19 Steering.pdf
applicable to all chrylser boxes
just the case is different from RHD to LHD
and the bearings
aussie ones used needle bearings due to earlier design not changing in 1971
but even in this aussie manual they have used some of the US pictures
it is
Well handy
pointless having a go at dave and clive they both mean well...both lovely chaps once you get past the initial fight or flight urge
if you tickle dave under the chin he makes a strange purring sound and is a very good mime artist
tickle clivey and you get a free bus pass and 25% discount at the london transport museum
and he can juggle chainsaws
marvelouse
Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
-
Dave-R
- Posts: 24752
- Joined: Sun Apr 18, 04 11:23 pm
- Location: Dave Robson lives in Geordieland
- Contact:
I am sometimes rude and harsh. My bad as the kids say.paddysplymouth wrote:surely forum that is broke down to specific catagories is there to be discussed with fellow members thats why its a forum correct ? its there for people to ask a question and for others to have an input to talk and discuss your topic other wise it wouldnt of been there in first place
Why will you not buy a manual???
Why not make things easy for yourself by having a manual to hand while you are doing the job? It is not like they are hard to find any more. OK 20 years ago it was difficult to get a manual. But you have no excuse.
You are asking people to stop what they are doing and to spend time trying to get you the information you need. Probably from their own manuals or by doing a Google search for you.
Do you not think that is a bit selfish? Just because you can't be bothered to get a manual?
I could understand not having a manual if you rarely work on the car and just to the odd job now and again.
But restore a whole car without one????? Even after working on these cars for 30 years I wouldn't even start without a manual handy as a reference.
Sorry for being a miserable t wat. I will try to be more helpful next time.
