Replacement window winder crank?

MilesnMiles · Post by **MilesnMiles** » Sat Sep 29, 12 4:30 pm

my truck windows decided not to work today. The handle spins around with the splined part, but the window doesn't crank up or down. took the panel off for closer inspection, but can't see inside the door.
what's knackered and where do I get new bits?
Rockauto list no manual window parts

AllKiller · Post by **AllKiller** » Sat Sep 29, 12 6:49 pm

My Truck did that it had worn the teeth off the crank slider in the door...so i bought some steel same thickness, cut a new piece and some new teeth cut in using the original slider to get spacing right, then replaced and welded it into place to repair the worn bit.....good as

That might not be the case with yours though...unless you can see it

MilesnMiles · Post by **MilesnMiles** » Sat Sep 29, 12 10:45 pm

Cleve stuff,Steve, but I can't see mine, although google images did help.
Manged to get it to move with a bit of push and shove, for now.

John · Post by **John** » Sun Sep 30, 12 9:06 am

AllKiller wrote:My Truck did that it had worn the teeth off the crank slider in the door...so i bought some steel same thickness, cut a new piece and some new teeth cut in using the original slider to get spacing right, then replaced and welded it into place to repair the worn bit.....good as

That might not be the case with yours though...unless you can see it

I welded the worn teeth and ground the shape back in on an old Merc I had Steve. Sod all that extra flaffing around you did there chap

John · Post by **John** » Sun Sep 30, 12 9:07 am

Delete double post please

Computer probs

MilesnMiles · Post by **MilesnMiles** » Sun Sep 30, 12 10:56 am

It's definitely shagged, checked again this morning Need to. Find replacement parts.