Will´s 1968 Dodge Charger

autofetish · Post by **autofetish** » Sat Jan 10, 15 9:06 pm

TPS

Throttle position sensor

This tells the ECU what postion the throttle is at

Now most people mount this up on engine next to butterfly's

I mounted it next to the throttle pedal under dash this ...

A. Makes it confusing when looking at engine how does it work

B. Gives a never level of tunablity.

I will be able to make sure just before the butterfly's open fuel starts.
This will help stop the blower sneezing which can be deadly.

Made Alu house/axle block , welded rod to pedal and rose joint bar.

<a href="http://s73.photobucket.com/user/autofet ... t.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... iguwlt.jpg" border="0" alt=" photo 859B8BE8-D800-4A1A-BC68-7AF7DB3097EA_zpsagiguwlt.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... u.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... ovbjdu.jpg" border="0" alt=" photo E05A9C00-3FE5-4773-A578-F37630C6C4D5_zpszaovbjdu.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... p.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... mbfxup.jpg" border="0" alt=" photo 47DC3B81-77DA-4064-B52E-A031653D6C59_zpsedmbfxup.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... j.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... qxsxxj.jpg" border="0" alt=" photo 5A407831-B3A3-4680-B2F1-DF04BF72FE3F_zpsjqqxsxxj.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... r.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... mazvjr.jpg" border="0" alt=" photo 478E6228-7EB3-456B-A44F-3BDD1113A589_zpsbsmazvjr.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... n.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... stip4n.jpg" border="0" alt=" photo AFD61744-B69C-44CA-A1E1-607301B420D3_zps17stip4n.jpg"></a>

autofetish · Post by **autofetish** » Sun Jan 11, 15 7:18 pm

Fuel tank

When I made my lowered boot floor I made it a little bigger than the tank.

So I coukd line it (from demon Tweeks its £97 a sheet) or you could go to a camping shop

Lined and put tank in then made up some Alu straps to hold it down for when doing some duke jumps

<a href="http://s73.photobucket.com/user/autofet ... 3.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... mor9y3.jpg" border="0" alt=" photo 0944009C-2BFA-4779-BD07-D4737FE84AEB_zpskqmor9y3.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... y.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... pifu5y.jpg" border="0" alt=" photo FBFD0B18-944E-4328-8B55-11654BCF6E26_zpsnlpifu5y.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... b.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... 7li1cb.jpg" border="0" alt=" photo 21896159-944A-4658-9B9F-7C47D6315D38_zpsbm7li1cb.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... o.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... 7zma0o.jpg" border="0" alt=" photo EA4D9A9B-C9EF-4987-9ED3-9DE3CA15F453_zpsdb7zma0o.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... b.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... dn6txb.jpg" border="0" alt=" photo 227FC48F-E598-42F2-9212-7B27CE31B3F9_zpshrdn6txb.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... 0.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... rvakx0.jpg" border="0" alt=" photo 9D6CB205-3089-4B7D-8C87-3DF6C129DE7F_zpsi9rvakx0.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... s.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... ajjqks.jpg" border="0" alt=" photo F46271E1-6A3F-4B10-BF46-191CC5BA0BAB_zpsjrajjqks.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... p.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... mfy8vp.jpg" border="0" alt=" photo 1861297A-9EED-43F6-B250-D0229B5F850E_zpsrlmfy8vp.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... e.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... vqbtpe.jpg" border="0" alt=" photo 28B87427-5AA7-4049-AAD6-BD332202D48F_zpsu2vqbtpe.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... 3.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... qe2us3.jpg" border="0" alt=" photo BEAD8E13-E740-4928-A266-0CDBE946274B_zpskeqe2us3.jpg"></a>

mopar_mark · Post by **mopar_mark** » Sun Jan 11, 15 7:25 pm

Your doing some great stuff Will.

I think you could of come down on weight/ strength of the TPS bracketry & Rod ends, it doesn't need much effort to alter the TPS position.

Must of taken a while to get the ratios right

db · Post by db » Sun Jan 11, 15 8:22 pm

I saw this lot for real the other day. Really clever stuff

The dash wiring looks truly terrifying up close!

Do you have foam between the tank and the straps mate, can't tell from the pics?

autofetish · Post by **autofetish** » Fri Jan 16, 15 10:19 pm

Yes mark the angle

Have a little bit of padded double sided tape between tank and braket

autofetish · Post by **autofetish** » Fri Jan 16, 15 10:25 pm

Next I had a braket machined up to hold my huge fuel reg.

It's boost reference so will increase fuel pressure at a 1:1 ratio to inlet Mainfold pressure.

Polished up and nice and close to fuel rails

<a href="http://s73.photobucket.com/user/autofet ... o.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... 8u6tgo.jpg" border="0" alt=" photo B4330052-39DE-4FA1-93B3-F2A5894567AE_zpsep8u6tgo.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... 9.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... zo3la9.jpg" border="0" alt=" photo D8F3C3CD-1D0F-4905-922C-19C9A0F9AAE3_zpspwzo3la9.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... a.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... ejoj5a.jpg" border="0" alt=" photo 524A1840-D81B-4E82-A7D5-23CEF3B98AB5_zpsfaejoj5a.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... r.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... fhbsor.jpg" border="0" alt=" photo 74025108-5340-49F2-AE35-AEEC5F40CC83_zpsclfhbsor.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... s.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... apr8qs.jpg" border="0" alt=" photo 7088E7BA-6060-4D16-91C5-64B9E5D7049A_zps1tapr8qs.jpg"></a>

sublimemike · Post by **sublimemike** » Fri Jan 16, 15 10:34 pm

Betcha just itching to fire her up . Lovely work as always. I look forward to seeing her in the flesh.

db · Post by db » Sat Jan 17, 15 7:21 pm

Mmmm... shiiiiinyyyy

mopar_mark · Post by **mopar_mark** » Sat Jan 17, 15 8:06 pm

Will,
I am not saying you will have a problem & most likely all will be OK. But it's not good practise to solid mount regulators.

autofetish · Post by **autofetish** » Sun Jan 18, 15 1:56 pm

Thanks mark I see where you coming from its a piston in a bush that won't like being rattled by engine will see how we get on with it can always change later.

Since I am mounting it solid I can use hardline to feed my fuel rails.

<a href="http://s73.photobucket.com/user/autofet ... j.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... ddj6rj.jpg" border="0" alt=" photo F762BD23-87B7-45CC-A59A-D622E47256CF_zps9uddj6rj.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... y.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... ag4rgy.jpg" border="0" alt=" photo BB083298-4172-4AFD-A121-6FC76D416877_zpshrag4rgy.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... i.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... ix8t2i.jpg" border="0" alt=" photo A2C283D6-4654-492F-9175-C7282E83052B_zpsnhix8t2i.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... 7.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... vfvz77.jpg" border="0" alt=" photo 090DEE19-C6D3-4D2C-8F1B-4097DE1BCA35_zpsaevfvz77.jpg"></a>

<a href="http://s73.photobucket.com/user/autofet ... q.jpg.html" target="_blank"><img src="http://i73.photobucket.com/albums/i205/ ... dubi4q.jpg" border="0" alt=" photo 64DE5278-DD8C-46AC-ABFB-48CF9626AA65_zpsemdubi4q.jpg"></a>

Guy · Post by **Guy** » Sun Jan 18, 15 6:48 pm

That must be tall if you need a step ladder to reach up to the injector hat

mopar_mark · Post by **mopar_mark** » Mon Jan 19, 15 6:14 pm

I know it was discussed previously, but you are regulating after the rails ?

You want full pressure going to the fuel rails....

Don't worry, I must get better glasses

autofetish · Post by **autofetish** » Tue Jan 20, 15 8:22 am

mopar_mark wrote:I know it was discussed previously, but you are regulating after the rails ?

You want full pressure going to the fuel rails....

Don't worry, I must get better glasses

http://www.moparuk.com/forums/viewtopic ... 543#555543

autofetish · Post by **autofetish** » Sun Feb 01, 15 5:05 pm

Well I would love to tell you all stories of making inlet runners longer and the quantum leap phenomenal.

But it's. Basically a 4inch penis enlarger that will make my blower/EFI setup

Stick out the bonnet another 4inches

Pete · Post by **Pete** » Sun Feb 01, 15 5:09 pm

Yep, you are definitely going to have to cut a big hole for that one, and drive wearing Stilts with a cushion on the seat!!!