Kev's 71' Satellite Sebring Plus

Blue · Post by **Blue** » Tue May 02, 17 11:46 am

Nice work! As far as I'm aware lower control arms are not prone to failure or flexing in normal use, sling it round a track hard with some sticky rubber and it could be a different story. It's one of those mods you do if you feel happier that it's done, it isn't necessary or something you would feel the benefit of on the road IMO.

kma176 · Post by **kma176** » Tue May 02, 17 1:24 pm

According to various websites stateside including PST they reckon its a no brainer if your rebuilding your LCA's it tightens up the pivot point nicely and does stop any twist and for approx. Â£25.00 the pair its cheap too.

ScottyDave · Post by **ScottyDave** » Tue May 02, 17 3:07 pm

Blue wrote:Nice work! As far as I'm aware lower control arms are not prone to failure or flexing in normal use, sling it round a track hard with some sticky rubber and it could be a different story. It's one of those mods you do if you feel happier that it's done, it isn't necessary or something you would feel the benefit of on the road IMO.

kma176 wrote:According to various websites stateside including PST they reckon its a no brainer if your rebuilding your LCA's it tightens up the pivot point nicely and does stop any twist and for approx. Â£25.00 the pair its cheap too.

Guess it'd be hard to tell the difference as it's a long time since I've driven it

but as the arms are getting poly bushed and new ball joints fitted it's probably going be worth doing

Blue · Post by **Blue** » Tue May 02, 17 3:55 pm

Yea the Americans have always been very good at selling you a solution for a problem you don't have

ScottyDave · Post by **ScottyDave** » Tue May 02, 17 4:21 pm

Blue wrote:Yea the Americans have always been very good at selling you a solution for a problem you don't have

Still gonna do it

Probably....

kma176 · Post by **kma176** » Tue May 02, 17 5:11 pm

Yep for the money it costs and while your rebuilding them even if it was only a couple of percent better its worth doing!!!

kma176 · Post by **kma176** » Wed Nov 29, 17 10:30 pm

Just finally getting around to re-loading some of the photos that got lost when I stopped using Photobucket!!

Upper wishbones and lower LCA'S all powder coated now.

: _DSC3125.JPG (250.63 KiB) Viewed 1970 times

: _DSC3126.JPG (249.86 KiB) Viewed 1970 times

Pete · Post by **Pete** » Wed Nov 29, 17 10:40 pm

Pete wrote: Wed Nov 29, 17 10:40 pm Very tidy, so much nicer assembling clean parts

kma176 · Post by **kma176** » Wed Nov 29, 17 10:53 pm

A few more pics to try and bring it a bit more up to date

Polycoated underside

: _DSC3084.JPG (213.35 KiB) Viewed 1965 times

: _DSC3085.JPG (249.97 KiB) Viewed 1965 times

Polycoated engine bay

: _DSC3091.JPG (230.08 KiB) Viewed 1965 times

kma176 · Post by **kma176** » Wed Nov 29, 17 10:57 pm

: _DSC3101.JPG (244.4 KiB) Viewed 1965 times

cadboy · Post by **cadboy** » Thu Nov 30, 17 5:53 am

Good work

R.RUNNER · Post by **R.RUNNER** » Fri Dec 01, 17 3:53 pm

B5 ???????

kma176 · Post by **kma176** » Wed Jan 10, 18 10:52 pm

Trying to bring this thread upto date a bit:- Getting a hand!!

: _DSC3090.JPG (224.98 KiB) Viewed 1918 times

: _DSC3096.JPG (225.17 KiB) Viewed 1918 times

: _DSC3117.JPG (225.15 KiB) Viewed 1918 times

: _DSC3120.JPG (209.73 KiB) Viewed 1918 times

kma176 · Post by **kma176** » Wed Jan 10, 18 10:55 pm

: _DSC3121.JPG (213.74 KiB) Viewed 1918 times

: _DSC3124.JPG (236.35 KiB) Viewed 1918 times

Derek · Post by **Derek** » Sat Jan 20, 18 1:14 pm

Couple of pics from when I was at Kev's a while ago, it's come a long way from then.

Mopar Muscle Association UK

Kev's 71' Satellite Sebring Plus

Re: Kev's 71' Satellite Sebring Plus

Re: Kev's 71' Satellite Sebring Plus

Re: Kev's 71' Satellite Sebring Plus

Re: Kev's 71' Satellite Sebring Plus

Re: Kev's 71' Satellite Sebring Plus

Re: Kev's 71' Satellite Sebring Plus

Re: Kev's 71' Satellite Sebring Plus

Re: Kev's 71' Satellite Sebring Plus

Re: Kev's 71' Satellite Sebring Plus