727 Reverse Servo in the UK?

deppmobile · Post by **deppmobile** » Sat Mar 21, 20 10:54 am

Anyone know if these are stocked anywhere in the UK? I've hunted but can't find any.

Superior Chrysler 727, 518, 46RE, 46RH Low & Reverse Steel Super Servo

: Screenshot_20200321-105025_eBay.jpg (31.84 KiB) Viewed 2726 times

Thanks!

Gerry

Cannonball · Post by **Cannonball** » Mon Mar 23, 20 12:00 pm

why do you need that ???? a band in good order and adjustment set correctly there is no problem with the stock part, after rebuilding in excess off maybe 500 727 transmissions I have only seen about 3 that have broke,

deppmobile · Post by **deppmobile** » Mon Mar 23, 20 3:44 pm

Funny you should say that, the symptoms I had suggested it might be a problem (taking a while to get into reverse after starting.)

Had a butchers yesterday and it looks fine, and the bore isn't scuffed up or worn.

I'll give you a call to order a new filter and gasket, and maybe a new seal for the servo as it's out

Thanks!

Blue · Post by **Blue** » Mon Mar 23, 20 7:07 pm

When I was doing Torqueflites a few years ago, shift kits were about the only performance parts anyone stocked, I've seen no evidence that the situation has changed.

DaveBishop · Post by **DaveBishop** » Mon Mar 23, 20 10:19 pm

as blue said you really only have to use one if the bore is worn it stops the piston cocking over thats all do have to use them

DaveBishop · Post by **DaveBishop** » Thu Mar 26, 20 10:54 am

i ment to say only if the bore is worn

Mopar Muscle Association UK

727 Reverse Servo in the UK?

727 Reverse Servo in the UK?

Re: 727 Reverse Servo in the UK?

Re: 727 Reverse Servo in the UK?

Re: 727 Reverse Servo in the UK?

Re: 727 Reverse Servo in the UK?

Re: 727 Reverse Servo in the UK?