diff

Anonymous · Post by **Anonymous** » Fri Aug 24, 07 5:37 pm

hello all --any up for overhaul ing rear diff 8.3/4 on charger ,thanks

Pete · Post by **Pete** » Fri Aug 24, 07 7:04 pm

What needs doing ???

Trigger_Andy · Post by **Trigger_Andy** » Fri Aug 24, 07 7:25 pm

Overhauling

Anonymous · Post by **Anonymous** » Fri Aug 24, 07 8:51 pm

hello ---as its all off car want to have checked over [overhauled] make sure every thing is happening as should be ,and theres no were ---

Anonymous · Post by **Anonymous** » Sun Aug 26, 07 9:34 am

I can do it

what case
is it open or posi

Not too sure on the turn round though as I have a 9 1/4 complete out of a ram in a million pieces at the moment

Dave-R · Post by **Dave-R** » Sun Aug 26, 07 3:08 pm

70rtse wrote:hello ---as its all off car want to have checked over [overhauled] make sure every thing is happening as should be ,and theres no were ---

I can do it too. But it is a lot easier to see/hear/feel if everything is alright when it is in a running car.

Be prepared for a big bill if you want all new bearings and or a new ring and pinion.

My advice to you would be to run it on the car and see if it has issues before diving into the deep end.

It might help if you put your location in your profile.

Anonymous · Post by **Anonymous** » Mon Aug 27, 07 8:52 am

Double post whoops.

Baccy

Anonymous · Post by **Anonymous** » Mon Aug 27, 07 8:54 am

Hi RT,

Where are you? Got some diff repair parts here in Kent.
What carrier is it, 489 or 742?

Baccy.

Anonymous · Post by **Anonymous** » Mon Aug 27, 07 4:52 pm

hello ---in sunny birmingham --think its a 741 ---going to take it up to wil to have a look --let you know if i need any parts thanks ,Andy

Dave-R · Post by **Dave-R** » Mon Aug 27, 07 7:46 pm

Wil is your man if you live in Brum.

Put your location in on your profile so we know in future where you are.

Anonymous · Post by **Anonymous** » Tue Aug 28, 07 8:04 am

So just out of interest Dave, what sort of average price can you expect for getting an 8 3/4 suregrip overhauled. What is 'big bills'?

Dave-R · Post by **Dave-R** » Tue Aug 28, 07 8:47 am

So are you talking just bearings?

R&P?

Suregrip?

Anonymous · Post by **Anonymous** » Tue Aug 28, 07 9:12 am

I havent got a clue fella. I suppose ring n pinion bearings and seals???

£500?

Dave-R · Post by **Dave-R** » Tue Aug 28, 07 9:40 am

Including labor. Yes. About £500.

That would be all seals, gasket, shims, ring bolts, the 4 bearings etc and a new R&P.

Anonymous · Post by **Anonymous** » Tue Aug 28, 07 1:57 pm

That seems quite reasonable for a peace of mind type exercise.

Mopar Muscle Association UK

diff

diff

diff

Re: diff

Diff

diff