power steering problem

Moderator: Moderators

Post Reply
Anonymous

power steering problem

Post by Anonymous »

My 68 charger loses its power steering under hard acceloration (its fine at all other times) anyone got any idea why.thanks
User avatar
Pete
Posts: 22108
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

Belt slip???
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

Pete's suggestion is the only one I can think of.
Anonymous

Post by Anonymous »

thanks for the replys guys that was my first guess as well but its tight and not slipping
Guy
Posts: 5002
Joined: Sun Apr 18, 04 10:20 pm
Location: Behind a Camera

Post by Guy »

I had the same problem on my camero after a while I found the problem was that the pully was slipping on the power steering pump shaft. It worked fine when cruising parking etc nail the throttle and then it would stop working.I dont recomend this but cured it by hitting very quickly with the welder but then again it was only a chevy.
User avatar
Kev
Posts: 13955
Joined: Sun Apr 18, 04 11:04 pm
Location: Brisbane, Oz.

Post by Kev »

Power Steering=PoofDah :D
<center>
The name is Kev, nowadays known as Kevvy or Pommie C***!</center>
Anonymous

Post by Anonymous »

I reckon its belt slip. You won't notice it while the engine is idling but the belt on mine has to be really tight otherwise it squeaks on hard accel.
User avatar
Dave-R
Posts: 24752
Joined: Sun Apr 18, 04 11:23 pm
Location: Dave Robson lives in Geordieland
Contact:

Post by Dave-R »

Ditto that Bratfink. I used to jam a big lever between the pump and the engine to force the pump out while I tightened the belt.

Of course then you have to start worrying about the bearing....
Post Reply